5/10/20pcs ESP8266 ESP-01S WiFi Wireless Module Breadboard Adapter Breakout

Description

Store category
Sign Up Now !
You may also like
5/10/20pcs ESP8266 ESP-01S WiFi Wireless Module Breadboard Adapter Breakout
Product Description
5/10/20pcs ESP8266 ESP-01S WiFi Wireless Module Breadboard Adapter Breakout
ESP-01S WiFi Module:
About program: Please choose "Generic ESP8285 Module" board in IDE to program it
Description:
comparing to esp-01, esp-01s has these advantages:
The PCB layout has changed for an improvement in WiFi radio performance
1MB Flash Memory...upgraded from 512KB
Latest version esp-01s,with stronger signal
Feature
SDIO 2.0, SPI, UART
32-pin QFN package
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
+19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
SDIO 1.1/2.0, SPI, UART
STBC, 1×1 MIMO, 2×1 MIMO
A-MPDU & A-MSDU aggregation & 0.4ms guard interval
Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
Integrated RISC processor, on-chip memory and external memory interfaces
Integrated MAC/baseband processors
Quality of Service management
I2S interface for high fidelity audio applications
On-chip low-dropout linear regulators for all internal supplies
Proprietary spurious-free clock generation architecture
Integrated WEP, TKIP, AES, and WAPI engines
Specification:
802.11 b/g/n
Wake up and transmit packets in < 2ms
Standby power consumption of < 1.0mW (DTIM3)
Adapter for ESP-01S:
Description
:
This is a breadboard adapter for the popular ESP-01, ESP-01S
As ESP-01S Pin arrangements are not breadboard friendly and are not labeled, which makes it little inconvenient for rapid prototyping.This breadboard adapter will help you to make
prototyping with esp-01S module much more easier.
This breakout conveniently offers clear pinout silkprint on top and will nicely fit your prefered breadboard.
Last but not least, we added a 0.1µF decoupling capacitor so the ESP-01S will always run smoothly and without a hitch.
Connection:
UART          Adapter
3.3V              VCC
3.3V             CH-PD
TX                  RX
RX                 TX
GND             GND
Choose both NL CR 115200 baud rate
ESP8266-01      UNO
TX                        2
RX                       3
VCC                  3.3V
CH_PD             3.3V
GND​​​                 GND
Payment
Shipping
Delivery time
Return Policy
Contact us
Payment
1.We accept Paypal payment only , you can use credit card through PayPal.
2.Please make payment asap,then we can arrange shipment for you asap.
Shipping
If total amount ≥ 7usd ,we provide a tracking number with
you.
Delivery time
Normally it arrive in 10-30 business days when your order amount is more than 7usd.
And 30-60 days when amount is less than 7usd.
Return Policy
1.All products are eligible for 30-days money back guarantee.
2.All returns should be guided by us, please contact us for detail before you return anything.
Contact us
We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
ESP-01S Wifi Module: About program: Please choose "Generic ESP8285 Module" board in IDE to program it Description: comparing to esp-01, esp-01s has these advantages: The PCB layout has changed for an improvement in WiFi radio performance 1MB Flash Memory...upgraded from 512KB Latest version esp-01s,with stronger signal Feature SDIO 2.0, SPI, UART 32-pin QFN package Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLLs, regulators, DCXO and power management units +19.5dBm output power in 802.11b mode Power down leakage current of <10uA Integrated low power 32-bit CPU could be used as application processor