Boston Scientific Endostat III Electrosurgical Generator W/Irriation Flow part

Description

SPECIAL PRICE FOR
Boston Scientific Endostat III Electrosurgical Generator
Used, pulled from a working environment.  No accessories included, selling as shown.
FROM BANKRUPTCY OFFICE AND IT POWERS ON NICLEY AND
SOLD MANY ITEMS FROM THIS PLACE W/NO ISSUES, SEE MY FEEDBACKS
BUT STILL DO TO LACK OF MY INFORMATION AS IS.
SHIPPING IN U.S IS - INTERNATIONAL PAYS EXTRA THROUGH EBAY GLOBAL SHIPPING
The
Endostat III Electrosurgical Generator
is a self-timing energy system that is designed to limit the depth of burn penetration.
Two Bipolar Modes: Continuous or variable time, designed to vary the duration of energy delivery. The monopolar capabilities of the Endostat III generator are intended to provide physicians the ability to perform certain therapeutic procedures using standard monopolar devices such as polypectomy snares, sphincterotomes, and hot biopsy forceps.
The
Endostat III
features a new safety standard that utilizes two separate warning systems intended to help identify the cause of a problem and prevent surgical error. The "pad fault" warning system is designed to detect a poor connection between the generator and the pad or between the pad and the patient. In the event of a fault, the RF power is designed to be inhibited until the connection is corrected.
A self-limiting energy system that is designed to limit the depth of burn penetration.
A variable speed peristaltic pump intended to provide precisely controlled irrigation.
Two bipolar modes: CONTINUOUS or VARIABLE TIME, designed to vary the duration of energy delivery.
The monopolar capabilities of the Endostat III Generator are intended to provide physicians the ability to perform certain therapeutic procedures using standard monopolar devices such as polypectomy snares, sphincterotomes, and hot biopsy forceps.
A choice of four individual RF waveforms: COAG, BLEND, CONTROL CUT, or CUT.
Receptacles that accept widely used monopolar active cords and disposable dispersive electrodes (patient plates, or grounding pads).
CONTROL CUT mode is designed to allow the operator to cut in increments by cycling the output power off and on at a predetermined rate
Pad contact monitoring circuit is intended to provide enhanced procedural safety by monitoring contact between the patient and the pad
Dual capability design is engineered to permit monopolar or bipolar energy
Integrated variable-speed E-Z Load peristaltic pump is designed to produce irrigation flow to assist in clearing bleeding sites