Colwood Wood Burner REPLACEABLE Tip Sets Woodburner

Description

This listing is for Colwood wood burner Fixed Tip pen sets.  There are 50 different Colwood Pen Tips The specific pens selected are my opinion.  If you want a different combination just let me know and I will create a set for you.
These Pens require a Colwood burner such as the Cub, Detailer, SuperPro, Galaxy etc.  unit or equivalent style unit to energize them. They do not heat up on there own. If you are not familiar with this style burner please message me for info BEFORE ordering .
Also note that Replaceable Tip (RT) pens do NOT save you any money unless you plan to buy at least 5 tips eventually ( 9 for a SuperPro as it needs 2 RT-handles). After that RT saves about -5 each tip.  You NEED an RT-handle and a EZ-Puller to use the tips
To order, you
select the specific pen set you want from the drop down list titled "MPN" above based on the name of the sets
,
not the picture
which is a representative picture of what a "Replaceable tip, RT " is -
note you only get the RT-Handle and EZ-puller with the Starter Set unless you order it
separately
.
I assume you are familiar with Colwood Pen shapes and have the paper work that came with your unit showing all the available pen shapes.
If not please look at attached images as they will show all tips
. Message me if you are unsure of what you are ordering
To see the difference between Replaceable tip pens and Fixed tip pens see attac.hed images which explain them, or
go to "YouTube" and find "
How to Use Colwood WoodBurning Tools".
I have
separate
listings for
Fixed tip pens and Colwood units such as the Cub & Detailer & SuperPro II.
Please note: Accidental damage is not covered by
warranty. The pen tips are delicate instruments that may break if dropped from a table.
The Starter Set  (A
Basic Pen set for burning pictures on a flat board)
of 3
Replaceable
Tip
s,
with 1  RT-handle and 1 EZ-puller
includes:
(These ARE the 3 as pictured with the blue background)
Skew
("RT - B" ) Replaceable
Tip-B (1/4") Large Point
Shader
(RT-S) -
Replaceable
Tip-S (3/16") Shading
Writing Tip
( RT-C)
Replaceable
Tip-C (.076") Writing
A writing tip used to sign your work. Also used for tight curved lines and designs on wood.
Rt-handle and an EZ-puller to safely remove the tips
The Heavy Duty Set  (A
set of tips for those that burn very hot or press very hard )
of 5
Replaceable
Tip
s
( NO handle NO puller)
includes
:
(No pictures as yet)
Skew
RT - B (w/ Heavy Wire)
- Replaceable
Tip-HB (1/4") Large Point
Shader
RT - S (w/ Heavy Wire)
-
Replaceable
Tip-HS (3/16") Shading
Writing Tip
RT - C (w/ Heavy Wire)
-
Replaceable
Tip-HC (.076") Writing
A writing tip used to sign your work & used for tight curved lines and designs on wood.
Combination Tip
RT - J (w/ Heavy Wire) (1/8")
-
Replaceable
Tip
Allows straight or curved lines in a tight radius, and when laid flat on its side used as a shader in tight spaces.
Small Shade
r - RT-SHS  -
Replaceable
Tip
Small Heavy Shader
The Bird Carvers Set of 4
Replaceable
Tip
s
( NO handle NO puller)
include:
Skew
(RT - BR)
(1/4") Round Heel; the rounded heel helps prevent gouging on concave work areas.
Guge
(R
T-Bob Guge)
Used for outlining feathers.
Bent in a special way to facilitate this process and allows the artists to keep their hand in a natural position.  The edge of the tip is  un
sh
arpened
to create a rabbet -
A rabbet (also known as a rebate in Britain) is a recess or groove cut into the edge of a piece
Skew
(RT-KR)
(5/32") Round Heel; the rounded heel helps prevent gouging on concave work areas.
Skew
(RT-LBG)
Larry Barth G
The Shader Set of 4 Replaceable Tips
( NO handle NO puller)
include:
RT-S (Standard Shader)  -
(3/16") Shading
RT-LSS (Large Square Shader) -
The tip is approximately .25 inches across.
RT-SRS (Small Round Shader)
RT-SP (Spoon Shader) -
A small shading tip used to shade in small tight areas.
The Animal Carvers Set of 4
Replaceable
Tip
s
( NO handle NO puller)
include:
RT-A
(1/4") Large Round
This tip is the largest of the rounded tips an is used for concave areas, such as under the neck and where the leg joins the body. This tip style will follow concave surfaces without digging into the wood.
RT-D
(3/16") Small Round
This tip is a medium size rounded tip that can be used for concave areas such as under the neck of a bird or duck or where the leg joins the body. This tip will follow concave areas without digging into the wood.
RT-E
(1/4") Spade
A general purpose tip with a cutting edge on each side.
RT-J
(1/8") Tight Round
The smallest of the rounded tips used for concave areas. This tip style will follow concaved surfaces without digging onto the wood.
The
CalligrapherSet of 4
Replaceable
Tip
s
( NO handle NO puller)
include :
Writing Tip
( RT-C)
(.076") Writing
A writing tip used to sign your work. Also used for burning plaques and designs on wood.
Calligrapher Tip
(RT-Micro C)
(.03) Micro Writing Similar to a fine ballpoint pen (falls in between the B1 and B2 tips). Each tip is individually ground and polished. This micro writing tip is used for extremely fine writing,
Calligrapher tip  Small
(RT-C1)
Not only used for calligraphy, this tip also makes an excellent shader.
Calligraphy Large
(RT-C2)
Not only used for calligraphy, this tip also makes an excellent shader.
The Fish Carver Set of 4
Replaceable
Tip
s
( NO handle NO puller)
include:
FT-FSS
Fixed Tip-FSS (Small 1/8")
Designed to burn fish scales
FT-FSM
Fixed Tip-FSM (Medium 3/16")
Designed to burn fish scales.
FT-FSL
Fixed Tip -FSL (Large 1/4")
Designed to burn fish scales
FT-FSXL
Fixed Tip -FSXL (Extra Large 3/8 inch)
Designed to burn fish scales
Circle Set of 4
Replaceable
Tip
Pens
( NO handle NO puller)
include:
New and Improved Circle tips allow the complete burning of the circle, all 360 degrees in one imprint.
Available in 4 four diameters: .071”, .100”, .189”, .240” - great for buttons, bird and fish eyes, etc.
RT -Circle (.071 Inch)
RT -Circle (.100 Inch)
RT -Circle (.189 Inch)
RT -Circle (.240 Inch)
Ball set of 3
Replaceable
Tips
( NO handle NO puller)
include:
RT-Ball 1
-
Size: .0394 in. dia.; approx. 1mm
RT- Ball 2 -
Size: .0625 in. dia; approx. 1.6mm
RT- Ball 3 -
Size: .09375 in dia.; approx. 2.3mm
Double Line Set of 2 Replaceable Tips
( NO handle NO puller)
include:
RT-DA  Shaped like the A tip but burns 2 lines at once
RT-DG  Shaped like the G tip but burns 2 lines at once
I use these on animal carvings to do fur as I can complete the burning in 1/2 the time. You won't win competitions with these but grand kids love them.
Replaceable Tip Handle and EZ-Puller
only
This is for those that already have Colwood Replaceable tips and have no handle or their handle is not working or with no handle but want one of the other replaceable tip sets that do not include a handle and puller already.   It includes an EZ-puller. If you want only the handle. message me.
If you need other items from me such as burner units or replacement or adapter cords, message me and request a total from me and I will adjust shipping charges to combine shipping costs to one actual cost which is usually less than individual shipping costs.
Questions or if you desire a specific set of Tips that I don't have listed or is out of stock - eBay message me
. If you want certain pens bent that don't normally come bent, let me know in advance and I can supply them.
As I am an authorized Colwood Dealer, all  standard Colwood
warranties
are honored by Colwood - 90 days on pens and tips - 1 year on cords, 2 years on units
Returns not accepted if items have been used electrically which is obvious from the discoloration from heating. Items used but not working may be covered by the  Colwood
warranty, if you need a copy of the
warranty
message me.