Conmed Smoke Evacuation System & Filter (Refurbished)

Description

Angelus
Medical and Optical Equipment
Conmed Smoke Evacuation System & Filter (Refurbished)
Conmed Smoke Evacuation System & Filter (Refurbished)
The ConMed 1000 SES Smoke Evacuation System & Conmed Filter is designed to remove smoke, aerosols, and noxious odors produced during electrosurgical procedures.
The ConMed 1000SES has been designed with a high suction, high flow rate centrifugal action pump. The ultra-quiet motor is used to draw the surgical smoke from the surgical site, through the vacuum tubing and into the 1000 SES filter where the surgical smoke is processed by a series of filters. A single disposable filter is used to simplify the installation and removal during filter changes. The filter is completely enclosed to protect the healthcare personnel from potential contamination during filter changes. One 1000 SES Filter contains four different filter stages to decontaminate the smoke plume:
The first stage filtration is a pre-filter whose function is to trap and remove gross particulate and casual fluid.
The second stage filtration is a VLSI (Very Large Scale Integrated) grade ULPA (Ultra Low Penetration Air) filter whose high-tech patented design captures particulates and micro-organisms down to 0.012 µm at an efficiency of 99.99995%. Each VLSI grade ULPA filter is pre-tested and certified before use.
The third stage filtration uses the highest grade virgin coal grade activated carbon for the removal and absorption of odors and toxic gases produced by cauterization of tissue. These harmful gases may constitute a health hazard to healthcare professionals who are subjected to prolonged exposure. The activated carbon used in the 1000 SES preferentially removes toxic organic gases rather than water vapor and provides optimal odor removal.
The fourth stage filtration is an expanded foam and paper media used to trap activated carbon fines from migrating out of the filter. The first, second, and fourth stages of the 1000 SES filter have been impregnated with a chemical agent. The chemical agent has been applied with a patented process that prevents the agent from being washed or blown off the filter media.
The electronic controls on the face panel of the 1000 SES System have been designed to be user-friendly and to facilitate set up and operation.
IMPORTANT: Availability Confirmation Needed
We are an open store and all items may not be updated on time. Please confirm the availability with us prior to making a payment. If your payment is processed prior to checking with us, a processing fee may apply.
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If this item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping the item.
Shipping
Shipping cost:
Shipping cost is based on your location. Please contact us for shipping cost.
Delivery time:
We require 3 days handling time.
Payment
We accept the following payment methods:
VISA
Mastercard
American Express
Discover
About Us
We are a the largest full service medical & optical equipment company in California established in 1946. We take pride in providing our customers with the best products and services. The quality of our fully refurbished products can be compared to new equipment, at a fraction of the cost.
We sell, service, repair, calibrate, reupholster, and purchase – new, refurbished, and certified - medical & optical equipment from our 50,000 sq ft facility in Gardena, CA. Conveniently located in the heart of Los Angeles, 10 minutes from LAX nested between 4 major freeways.
Contact Us
If you have questions please feel free to contact us.