-40%
DC-DC 12A 300W Adjustable Voltage CC CV Buck Converter 7-40V to 0.8-28V
$ 2.04
- Description
- Size Guide
Description
Store categorySign Up Now !
You may also like
DC-DC 12A 300W Adjustable Voltage CC CV Buck Converter 7-40V to 0.8-28V
Product Description
Description:
Features:
Use a dedicated benchmark IC, and high-precision current sensing resistor, make more stable constant current, (when 20°C to 100°C constant current 1A, temperature drift less than 1%). Particularly suitable for LED driver.
Fixed turn lamp current is 0.1 times the current value (When charging, used to identify whether the battery is fully charged);
High output current, the max output current can reach 12A.
Low output ripple , high frequency capacitor reduces output ripple.
Module parameters:
Module Properties: non-isolated step-down module, constant current and constant voltage module (CC CV), charging module
Input voltage: 7-40V
Output voltage: 0.8-28V (continuously adjustable)
Output Current: 12A ( power tube temperature exceeds 65°C please add cooling fan )
Constant current range :0.2-12A ( adjustable )
Turn lamp current : constant current value * ( 0.1 ) , turn lamp current and constant current value linkage.For example, constant current value 3A, turn lamp current is set to 0.1 times constant current(0.1 * 3A = 0.3A). When adjust the constant current to 2A , then turn lamp current is 0.1 times constant current (0.1 * 2A = 0.2A).
Turn lamp current is fixed to 0.1 time in this version( actually turn lamp current value is probably not very accurate ), it is for identify whether the battery is fully charged.
Dropout voltage: 1V
Output Power: Maximum power is about 300W, power tube temperature exceeds 65 degrees please add fan.
Conversion efficiency : up to approximately 93% ( the higher output voltage, the higher the efficiency )
Output ripple : 20M bandwidth ( for reference only )
Input 24V Output 12V 5A ripple around 50mV ( excluding noise )
Operating temperature : Industrial grade (-40 °C to +85 °C)
No-load current : Typical 20mA (24V step down to 12V)
Load regulation : ± 1% ( constant voltage)
Voltage regulation : ± 1%
Constant accuracy and temperature: the actual test , the module temperature changes from 25 degrees to 60 degrees , the change of the constant current value is less than 5% ( constant current value 5A)
Dynamic response speed : 5% 200uS
Potentiometer adjustment: clockwise ( increase ) , counterclockwise ( decrease ). The potentiometer close to the input port is for voltage adjust (CV), the potentiometer close to the output port is for current adjust(CC).
Indicator : double color indicator. When charging the indicator is RED, fully charged is GREEN( No load is green ).
Output short circuit protection : Yes , constant current ( constant current value you set)
Input Reverse Polarity Protection: None,
Output prevent backflow : None.
Wiring: Terminal
Size:65(L)*47(W)*23.5(H) mm
Some Applications:
High-power LED constant current driver ,
Lithium battery(or Iron battery) charge,
6V, 12V, 14V, 24V battery charge ,
Nickel -cadmium nickel-metal hydride battery ( battery pack ) charge ,
Solar panels and wind turbines
Battery charge:
Make sure of the battery float voltage and charging current that you need, the input voltage of the module.
Adjust the constant voltage potentiometer, adjust the output voltage to about 5V.
Use the multimeter in 10A current scale to measure output short-circuit current,and adjust the current potentiometer to make sure the output current to the expected charging current value.
Adjust the constant voltage potentiometer make the output voltage reaches the float voltage;
Connected to the battery, try to charge.
(1,2,3,4 steps to connect the power module input,output no-load does not connect battery.)
LED constant current drive:
Make sure operating current and Max operating Voltage of the LED you need to drive.
Adjust the constant voltage potentiometer, adjust the output voltage to about 5V.
Use the multimeter in 10A current scale to measure output short-circuit current, and adjust the current potentiometer to make sure the output current to the expected LED operating current.
Adjust constant voltage potentiometer make the output voltage reach the maximum LED operating voltage.
Connect LED, test.
(1,2,3,4 steps to connect the power module input, output No-load does not connect LED.)
Pls buy with confidence
Shipping
Payment
About us
customer service
Pls buy with confidence
We are spending more than 6 years in eBay business, we promise, we are an Honest and Hard-working seller, we do love our Job, we already try our best to provide best services.
Hope you enjoy your purchase in our store
If any questions and ideas, just feel free to tell us ,we are here for you or will be back to you within 24 hours.
Our reputation for excellent customer service has been built over 5 years of trading by providing great value and support to all of our customers. With tens of thousands of products shipped,we understand the things that matter to you, the buyer.
Shipping
We ship to Paypal registered address only!
Items will be shipped within 24 hours after payment received.
For Items that shipped from China is send by Airmail, it normally take 15-35 days for delivery
For Items that shipped from UK warehouse is send by Royal Mail
, it normally take 2-5 days for delivery, and
no tax to The European Union!!!
If you do not receive your item after 35 days. please contact us immediately for further assistance. We will be responsible for any damages or losses incurred in the shipping process.
Import duties, value added taxes and any other charges are NOT included in the item price or shipping costs. As an eligible importer,you are responsible for any reasonable tax or any other importation fees.
Payment
W
e accept
paypal
only !
Payment must be received in 5 business days .
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
About us
Specialized in electronic components and moudels.
Real store, Goods in stock.
Competive price. Good quality
We have more than 8 years experience in international business.have a wealth of experience in shipment. and we work with reliableshipment company, can get good price from DHL in Hongkong.
customer service
1. We take care of all requirements from every single valued customer, like you. Therefore, we do our best to control the quality of each item before sending.
2. In very rare case, if the product is found faulty, please contact us for return or refund.
3. In addition, we offer 30 days unconditional Refund Warranty and 1 Year Manufacturer Warranty.
4. We must be informed if you do not like the device within 7 days upon receiving the item and we will give you a returned merchandise authorization number (RMA). Without (RMA), the buyer will be responsible for any loss of return.
5. All returns must include all original items undamaged, in re-saleable condition, all original packaging including manuals, warranty forms, etc.
6. As we are selling all items on eBay from factory at lowest price, we are unable to refund you shipping and handling costs. Buyer is responsible for shipping costs incurred shipping products back.
Description: Features: Use a dedicated benchmark IC, and high-precision current sensing resistor, make more stable constant current, (when 20°C to 100°C constant current 1A, temperature drift less than 1%). Particularly suitable for LED driver. Fixed turn lamp current is 0.1 times the current value (When charging, used to identify whether the battery is fully charged); High output current, the max output current can reach 12A. Low output ripple , high frequency capacitor reduces output ripple. Module parameters: Module Properties: non-isolated step-down module, constant current and constant voltage module (CC CV), charging module Input voltage: 7-40V Output voltage: 0.8-28V (continuously adjustable) Output Current: 12A ( power tube temperature exceeds 65°C please add cooling fan ) Constan
On Dec-02-18 at 21:54:39 PST, seller added the following information: