For High Low Level Trigger 5V/9V/12V/24V 1/2/4 Channel Relay +Optocoupler B2AE

Description

Store category
Sign Up Now !
You may also like
Support High Low Level Trigger 5V/9V/12V/24V 1/2/4 Channel Relay +Optocoupler
Product Description
5V 1 Channel Relay Module:
1-Channel relay module, with photoelectric isolation
The module can be high or low by a jumper setting trigger
With power and relay action indicator
The module Operating voltage 5V
The module uses genuine quality relay, normally open interfaces Maximum load: AC 250V/10A, DC 30V/10A
Module interface:
DC+: positive power supply (VCC)(5V)
DC-: negative power supply (GND)
IN: The control end, the driving current should be more than 4m
ACOM: The control of loop of earth wire
5V 2 Channel Relay Module:
Module size : 50mm * 41mm * 18.5mm ( L * W * H )
Has four mounting bolts holes , hole 3.1mm, 44.5mm * 35.5mm pitch
Interface :
1. DC +: positive power supply ( voltage required by the relay , there 5V.9V.12V and 24V choice )
2. DC-: negative power connection
3. IN1: 1 channel signal to trigger the end , you can set a high or low level control relay
3. IN2: 2 -channel signal to trigger the end , you can set a high or low level control relay
Outputs :
1. NO1: After a relay normally open interfaces , relay before floating, shorted pull with COM1
2. COM1: 1 relay common interface
3. NC1: 1 relay normally closed port, COM1 relay shorted before and after the pull- vacant
4. NO2: 2 -way normally open relay interface, the relay before floating , pull back and COM2 short
5. COM2: 2 Common Interface relay
6. NC2: 2 -way normally closed relay interface relay short front and COM2 , pull vacant post
9V 1 Channel Relay Module:
Parameter:
Maximum load: AC 250V/10A, DC 30V/10A
Trigger current: 5mA
Working voltage: 9V (we have other opitions)
Module size: 50 x 26 x 18.5mm (L x W x H)
Four mounting bolts holes, diameter 3.1mm
Module interface:
DC+: positive power supply (VCC)
DC-: negative power supply (GND)
IN: can be high or low level control relay
Relay outputs:
NO: normally open relay interface
COM: Common Interface Relays
NC: normally closed relay interface
High and low level trigger options:
It is low level trigger when jumper connect to LOW pin
It is high level trigger when jumper connect to HIGH pin
9V 2 Channel Relay Module:
Product Name: Optocoupler Driver Relay Module
Relay Type: SRD-09VDC-SL-C
Coil Voltage: DC 9V
Pole Number: 2 Channel
Load: 10A, AC 250V/125V, DC 30V/28V
Overall Size: 5 x 4.1 x 1.8cm/2" x 1.6" x 0.7"(L*W*H)
Materials Meta: Plastic, Electric Parts
Main Color: Red
9V 4 Channel Relay Module:
Product Name: Optocoupler Driver Relay Module
Relay Type: SRD-09VDC-SL-C
Coil Voltage: DC 9V
Pole Number: 4 Channel
Load: 10A, AC 250V/125V, DC 30V/28V
Overall Size: 7.3 x 5 x 1.8cm/2.9" x 2" x 0.7"(L*W*H)
Materials Metal: Plastic, Electric Parts
Main Color: Red, Blue
12V 1 Channel Relay Module:
module size: 50mm * 26mm * 18.5mm (L * W * H)
four mounting bolts holes, hole 3.1mm, 44.5mm * 20.5mm pitch
Two module interface:
1, DC +: positive power supply (voltage required by the relay, there 5V.9V.12V and 24V choice)
2, DC-: negative power connection
3, IN: can be high or low level control relay
Relay outputs:
1, NO: normally open relay interface, the relay before the vacant after the pull shorted with COM
2, COM: Common Interface Relays
3, NC: normally closed relay interface relay shorted with COM ago, after the pull-vacant
High and low level trigger selection ends:
1 when jumper short circuit with LOW is low lever trigger;
2 When jumper short circuit with high is high lever trigger.
12V 2 Channel Relay Module:
Module size: 50mm*41mm*18.5mm.
Module interface specifications:
1. DC+ : DC power supply positive pole
2. DC- : DC power supply negative pole
3. IN1 : channel 1 signal triggering pin
4. IN2 : channel 2 signal triggering pin
Relay output:
1. Normally closed pin (NC1) : channel 1 relay normally closed pin
2. Common pin (COM1) : channel 1 relay common pin
3. Normally opened pin (NO1) : channel 1 relay normally opened pin
4. Normally closed pin (NC2) : channel 2 relay normally closed pin
5. Common pin (COM2) : channel 2 relay common pin
6. Normally opened pin (NO2) : channel 2 relay normally opened pin
12V 4 Channel Relay Module:
Size: 73mm * 50mm * 18.5mm ( L * W * H )
four mounting bolts holes , hole 3.1mm, 67mm * 44.5mm pitch
Interface :
1. DC +: positive power supply ( voltage required by the relay , there 5V.9V.12V and 24V choice )
2. DC-: negative power connection
3. IN1-IN4: each way based on the settings , can be high or low to control the corresponding relay
outputs :
a 12- line interface, the interface can be directly connected to all leads , user-friendly
1. NO1 - NO4: normally open relay interfaces , relay before the vacant after the pull shorted with COM
2. COM1 - COM4 Common Interface Relays
3. NC1 - NC4: normally closed relay interface relay shorted with COM ago , after the pull- vacant
24V 2 Channel Relay Module:
Module size : 50mm * 41mm * 18.5mm ( L * W * H )
four mounting bolts holes , hole 3.1mm, 44.5mm * 35.5mm pitch
Interface :
1. DC +: positive power supply ( voltage required by the relay , there 5V.9V.12V and 24V choice )
2. DC-: negative power connection
3. IN1: 1 channel signal to trigger the end , you can set a high or low level control relay
3. IN2: 2 -channel signal to trigger the end , you can set a high or low level control relay
Outputs :
1. NO1: After a relay normally open interfaces , relay before floating, shorted pull with COM1
2. COM1: 1 relay common interface
3. NC1: 1 relay normally closed port, COM1 relay shorted before and after the pull- vacant
4. NO2: 2 -way normally open relay interface, the relay before floating , pull back and COM2 short
5. COM2: 2 Common Interface relay
6. NC2: 2 -way normally closed relay interface relay short front and COM2 , pull vacant post
24V 4 Channel Relay Module:
Module size : 73mm * 50mm * 18.5mm ( L * W * H )
four mounting bolts holes , hole 3.1mm, 67mm * 44.5mm pitch
Interface :
1. DC +: positive power supply ( voltage required by the relay has 24V option)
2. DC-: negative power connection
3. IN1-IN4: each way based on the settings , can be high or low to control the corresponding relay
Outputs :
12- line interface, the interface can be directly connected to all leads , user-friendly
1. NO1 - NO4: normally open relay interfaces , relay before the vacant after the pull horted with COM
2. COM1 - COM4 Common Interface Relays
3. NC1 - NC4: normally closed relay interface relay shorted with COM ago , after the pull- vacant
Package Include:
1 x Relay Module
Pls buy with confidence
Shipping
Payment
About us
customer service
Pls buy with confidence
We are spending more than  6 years in eBay business, we promise, we are an Honest and Hard-working seller, we do love our Job, we already try our best to provide best services.
Hope you enjoy your purchase in our store
If any questions and ideas, just feel free to tell us ,we are here for you or will be back to you within 24 hours.
Our reputation for excellent customer service has been built over 5 years of trading by providing great value and support to all of our customers. With tens of thousands of products shipped,we understand the things that matter to you, the buyer.
Shipping
We ship to Paypal registered address only!
Items will be shipped within 24 hours after payment received.
For Items that shipped from China is send by Airmail, it normally take 15-35 days for delivery
For Items that shipped from UK warehouse is send by Royal Mail
, it normally take 2-5 days for delivery, and
no tax to The European Union!!!
If you do not receive your item after 35 days. please contact us immediately for further assistance. We will be responsible for any damages or losses incurred in the shipping process.
Import duties, value added taxes and any other charges are NOT included in the item price or shipping costs. As an eligible importer,you are responsible for any reasonable tax or any other importation fees.
Payment
W
e accept
paypal
only !
Payment must be received in 5 business days .
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
About us
Specialized in electronic components and moudels.
Real store, Goods in stock.
Competive price. Good quality
We have more than 8 years experience in international business.have a wealth of experience in shipment. and we work with reliableshipment company, can get good price from DHL in Hongkong.
customer service
1. We take care of all requirements from every single valued customer, like you. Therefore, we do our best to control the quality of each item before sending.
2. In very rare case, if the product is found faulty, please contact us for return or refund.
3. In addition, we offer 30 days unconditional Refund Warranty and 1 Year Manufacturer Warranty.
4. We must be informed if you do not like the device within 7 days upon receiving the item and we will give you a returned merchandise authorization number (RMA). Without (RMA), the buyer will be responsible for any loss of return.
5. All returns must include all original items undamaged, in re-saleable condition, all original packaging including manuals, warranty forms, etc.
6. As we are selling all items on eBay from factory at lowest price, we are unable to refund you shipping and handling costs. Buyer is responsible for shipping costs incurred shipping products back.
5V 1 Channel Relay Module: 1-Channel relay module, with photoelectric isolation The module can be high or low by a jumper setting trigger With power and relay action indicator The module Operating voltage 5V The module uses genuine quality relay, normally open interfaces Maximum load: AC 250V/10A, DC 30V/10A Module interface: DC+: positive power supply (VCC)(5V) DC-: negative power supply (GND) IN: The control end, the driving current should be more than 4m ACOM: The control of loop of earth wire 5V 2 Channel Relay Module: Module size : 50mm * 41mm * 18.5mm ( L * W * H ) Has four mounting bolts holes , hole 3.1mm, 44.5mm * 35.5mm pitch Interface : 1. DC +: positive power supply ( voltage required by the relay , there 5V.9V.12V and 24V choice ) 2. DC-: negative power connection 3. IN1: 1 ch