For Raspberry Pi Zero UPS-Lite Power Board With 1000mAh Polymer Lithium Battery

Description

Visit store
Items for sale
About us
Product Details
Product introduction:
UPS-Lite is a UPS power supply specially designed for Raspberry Pi Zero (hereinafter referred to as pi).
It is powered by a 1000mAh polymer lithium battery, supports external power insertion detection, and supports charging and discharging. When the external power source is plugged in, the pi is powered by the external power source. When the external power source is unplugged, the pi seamlessly switches to the lithium battery. The UPS-Lite is connected to the pi main board through 5 elastic thimble pins (the pi main board must be soldered with a 40-pin header), and the pi power supply and power reading function are completed through the thimble. In addition, UPS-Lite also integrates the professional fuel gauge chip MAX17040G, two-color charging status indicator
Parameter:
Charging current: max 400mA at 5V
Output current: max 1.3A at 5V (when the external power supply is not plugged in, only battery power is used)
max 2A at 5V (when the external power supply is plugged in)
Power measurement: battery power SOC percentage, error ±2%, voltage measurement error within ±3mV
Function use:
Charging and power plug detection function
It is recommended to use a power adapter with a power of 5V2A and above to charge the UPS-Lite. Because when the lithium battery is low, the external power adapter not only needs to supply power to the pi, but also needs to provide part of the current to charge the lithium battery. During charging, the charging status indicator is red, indicating that the battery is charging. When the lithium battery is fully charged, the charging status indicator will turn green, indicating that the battery is fully charged. In addition, UPS-Lite has an external power adapter plug-in detection function, which can judge whether the external power supply is plugged in by the high and low level of the GPIO port. When the power supply is plugged in, the io4 (BCM number) of the pi will detect a high level. Low level, to enable the detection function, you must short the two pads on the back of the UPS, and set the GPIO to the floating input state. If the pads are not shorted, the GPIO detection state is unstable
Package Included:
1x Power board
1x 1000mAh Battery
Payment Method
Shipping Policy
Returns & Refund Policy
Feedback
Payment Method
EBAY Managed Payment.
But we only
Accept
your
Ebay Address
, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping Policy
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Returns & Refund Policy
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.