Gemm Piano Universal Bass Strings Replacement - Full Set of 37 Strings Series

Description

Universal Bass Strings Replacement
Set of 37 Strings
Gemm Piano Supply
The Universal Bass String packet enables you to make "On-the-Spot" replacement of all single-wound Bass Strings except the largest grands. It's a MUST in Tuners' Kits because it permits immediate replacement of broken or dead strings while on the JOB and saves the costly call back. IT"S CONVENIENT...you simply unwind covering wire, clip it and the extended core wire to correct length and install.
To keep your set complete, simply return the tag from the string you use and we will send you the exact duplicate.
A special assortment of 37 Strings adaptable to some of the better make grands which use a lighter size steel core and a heavier size copper covering wire.
To determine what size you'll need, you can measure the diameter of the wire with a
micrometer
or caliper. Precise measurements are very important.
3-5/8" hitch to wrap on all strings and includes numbers: 1 through 37.
Replacement
Hitch to Wrap Length
Length of Wrap
Approx. Outer Diameter of Wire
2037R-1
3-5/8"
56-1/8"
.138"
2037R-2
3-5/8"
55-7/8"
.136"
2037R-3
3-5/8"
55-5/8"
.132"
2037R-4
3-5/8"
55-3/8"
.128"
2037R-5
3-5/8"
55-1/4"
.125"
2037R-6
3-5/8"
55"
.122"
2037R-7
3-5/8"
54-3/4"
.118"
2037R-8
3-5/8"
54-1/2"
.116"
2037R-9
3-5/8"
54-1/4"
.114"
2037R-10
3-5/8"
54"
.112"
2037R-11
3-5/8"
53-5/8"
.109"
2037R-12
3-5/8"
53-1/2"
.107"
2037R-13
3-5/8"
53-1/8"
.104"
2037R-14
3-5/8"
53-1/8"
.099"
2037R-15
3-5/8"
53-1/8"
.097"
2037R-16
3-5/8"
53-1/8"
.094"
2037R-17
3-5/8"
53-1/8"
.092"
2037R-18
3-5/8"
53-1/8"
.088"
2037R-19
3-5/8"
53-1/8"
.086"
2037R-20
3-5/8"
53-1/8"
.082"
2037R-21
3-5/8"
53-1/8"
.080"
2037R-22
3-5/8"
53-1/8"
.077"
2037R-23
3-5/8"
53-1/8"
.076"
2037R-24
3-5/8"
53-1/8"
.075"
2037R-25
3-5/8"
53-1/8"
.073"
2037R-26
3-5/8"
53-1/8"
.071"
2037R-27
3-5/8"
53-1/8"
.069"
2037R-28
3-5/8"
52-7/8"
.067"
2037R-29
3-5/8"
52-1/2"
.066"
2037R-30
3-5/8"
52-1/4"
.065"
2037R-31
3-5/8"
51-3/4"
.064"
2037R-32
3-5/8"
51-3/8"
.063"
2037R-33
3-5/8"
51"
.062"
2037R-34
3-5/8"
50-5/8"
.061"
2037R-35
3-5/8"
50-1/4"
.060"
2037R-36
3-5/8"
45-1/4"
.058"
2037R-37
3-5/8"
44-7/8"
.056"
Instructions for installing universal Replacement Piano Bass Strings:
1.- Place the loop end of the wire over the hitch pin and across the bass bridge. Line up replacement string with other strings in the piano. Measure 1/4" from the point where the windings end on other strings toward the bass bridge. Cut through the copper winding of the new string at this point.
2.- Stretch the replacement string across to the upper plate bearing or agraffe. Line up the replacement string with the windings of the other strings. Measure 1/4" from the winding line toward the opposite (hitch pin) side to allow for stretch. Cut through the copper winding of the new string at this point.
3.- Stretch the replacement string up to the tuning pin. Allow enough length for 3 coils on the tuning pin. Cut through the winding and wire core to remove excess length of the replacement string.
4.- Be sure to cut through the copper winding with a circular motion in the same direction as the winding has been done. This will prevent the windings from loosening their grip on the core wire.
5.- Remove the replacement string and unwind the copper winding at both ends up to the scored sections. Then install as you would any custom made string.
Qty: 37 Universal Bass Strings
The #1 choice for Piano Technicians.
Made in United States
We carry a variety of piano tools and accessories.
Please visit our ebay store Gemm Piano Supply
International Orders - Please Note:
Customs fees/Charges and Taxes are not included in the item price or shipping cost. These fees/charges are the buyer's responsibility. We recommend you check
with your country's customs office to determine what these additional costs will be prior to making your purchase.