Metal Hold Down acke and Pins, Blind acke Blind Holder Replacemen for Hontal Bli

Description

Metal Hold Down acke and Pins, Blind acke Blind Holder Replacemen for Hontal Bli
Durable: these metal hold down acke are made of reliable metal materials, strong, durable and , easy to install and less likely to deform or eak; They are suitable for most blinds or windows and can serve you for a long time< />Appropriate size: It is suitable for most blinds and does not take up too much space; Before oe, please check the size carefully and make sure they can match your windows or blinds< />Simple design: blind hold down acke are simple in design, small in size, thus, they are difficult to be noticed; Using them to hold down most blinds will not aff the oall appearance of the blinds, and you can enjoy the beautl scenery from the windows as well< />Easy to apply: the installation and application of these tools are rather easy and convenient; Firstly, you put the pins into the holes of the acke, and then reinforce them and you can successfully apply them; For more details, please refer to the installation steps below< />Proper ans simple appearance: These metal hold down acke are simple in design, small in size, thus, they are difficult to be noticed. Using them to hold down most blinds will not aff the oall appearance of the blinds, and you can enjoy the beautl scenery from the windows as well.< />< />Installation procedures:< />1. What you need: drill, screwdri, tape measure, hammer, pencil.< />2. If the bot rail is not fitted with pins, drill a approx. 1/2 inch deep 7/64 inch or 3/32 inch bit in the center to hold pins on both sides of the rail.< />3. Punch the pins in.< />4. Put the blind plate down, put the bot rail flat in place, and mark the position of the fixed acket with a pencil.< />5. Screw the acket to the door.< />6. Measure the position of the acket now screwed to the door and mark on the other side.< />7. Then repeat the above steps to install