-40%
Microchip PIC Ethernet/Webserver Board, 2 Relays, 16 Inputs
$ 15.31
- Description
- Size Guide
Description
PIC18F97J60 Ethernet/Webserver Board, 2 Relays, 16 Inputs PIC-MAXI-WEBThis Microchip PIC board allows you to develop an easy Ethernet connectivity application. It has everything you normally would need for such activity: power relays which you can command through web interface, an LCD that will display messages you fill in web forms, analog inputs for connection to sensors, digital opto-isolated inputs, trimmer potentiometer, temperature sensor, and an Ethernet connector. With this board, you can easily automate your home and then control and monitor it from any point in the world via Internet. The extension connector is available so you can connect your custom-made hardware with minimum hassle.
The PIC18F97J60 MCU has 128KB Flash programming memory, and the board has an external 1Mbit (128KB) Flash memory for data storage. The on-board DC/DC converter makes this board very tolerant to the external power supply which could be in 9-25V DC or 7-18V AC range. The bridge rectifier on the input allows AC and DC adapters to be used and eliminates power supply polarity problems.
Microchip PIC18F97J60 Ethernet Board Features
PIC18F97J60 microcontroller with embedded Ethernet MAC & PHY and 128KB Flash programming space
1Mbit on-board serial Flash for web pages storage
ICSP/ICD connector for programming and debugging
Temperature sensor
Trimmer potentiometer connected to analog input
Two relays 10A/250V AC
Four opto-isolated digital inputs
Twelve analog inputs on terminal block
Two buttons
16 x 2 LCD with backlight
RS232 interface
Ethernet interface
Complete web server and TCP/IP stack support as per Microchip's open-source TCP/IP stack AN833
Terminal block for power supply works with 9-25V DC power supply
Extension header to connect to other boards
Dimensions: 120 x 108 mm (4.72 x 4.25")
The board comes with the TCP/IP stack pre-loaded. DHCP is enabled and IP is set to 192.168.0.30.