Richco LCBS-6-01 9.53mm Snap Lock Nylon PCB Support 20 Pieces MBE004C

Description

Richco LCBS-6-01 9.53mm Snap Lock Nylon PCB Support 20 Pieces MBE004C
Richco LCBS-6-01 9.53mm Snap Lock Nylon PCB Support 20 Pieces MBE004C
Board Support Snap Lock / Snap Lock Nylon 0.375″ (9.53mm) 3/8″
20 Pieces
This diagram is of a similar product the basic design is the same but is for guidance only, see the photographs for the actual pillars you will receive.
BOTTOM WINGED SNAP FIT PEG AFFIXES THE SUPPORT TO THE CHASSIS
TOP SNAP FIT PEG SECURES THE PCB TO THE SUPPORT
“A” Measurement on diagram above = 9.53mm (
3/8″
)
9.53mm High Nylon Locking PCB Support Pillar With 4mm PCB Hole and 4.75mm Chassis Hole
Product Details
Locking PCB Pillars
Nylon PCB support pillar. This type snaps into place on both the chassis and the board and requires no fixing screws.
Can be fitted and released by hand
Colour: Natural
Holding Type
Snap Lock
Mounting Type
Snap Lock
Between Board Height
0.375″ (9.53mm) 3/8″
Length – Overall
1.106″ (28.10mm)
Support Hole Diameter
0.157″ (4mm)
Support Panel Thickness
0.062″ (1.57mm) 1/16″
Mounting Hole Diameter
0.187″ (4.75mm) 3/16″
Mounting Panel Thickness
0.031″ ~ 0.078″ (0.79mm ~ 1.98mm)
Features
Winged
Material
Nylon
These came to us as part of a lot of surplus stock from a large ‘Milspec’ type Co. having been in storage for some time we have classified them as ‘new other’. Despite being ‘old new stock’ these are good quality and still perfectly serviceable, stored with us still in original sealed bags.
Dispatch time:
Will dispatch within 1 working day of receiving cleared payment
.
Payment
We accept the following payment methods:
PayPal
Please contact us if you have any questions.
Service
We purchase Surplus Stock. If you or your company have items similar to the above, or indeed any electronic components surplus to requirements, please contact us with details as we are keen to increase our stock profile.
This diagram is of a similar product the basic design is the same but is for guidance only, see the photographs for the actual pillars you will receive. 9.53mm High Nylon Locking PCB Support Pillar With 4mm PCB Hole and 4.75mm Chassis Hole Nylon PCB support pillar. This type snaps into place on both the chassis and the board and requires no fixing screws. These came to us as part of a lot of surplus stock from a large ‘Milspec’ type Co. having been in storage for some time we have classified them as ‘new other’. Despite being ‘old new stock’ these are good quality and still perfectly serviceable, stored with us still in original sealed bags. We purchase Surplus Stock. If you or your company have items similar to the above, or indeed any electronic components surplus to requirements, pleas