Screw Terminals Board, 8x Small + Power, IDC10 (EasyConnect2)

Description

Screw Terminals Board, 8x Small + Power, IDC10 (EasyConnect2)
MIKROE-194
Ten screw terminals; one for each pin of the IDC10 connector
Female IDC10 connector is compatible with I/O port headers on mikroElektronika development systems
For use with 2.7V to 5V systems
The EasyConnect2 Board features small screw-terminated connectors that enable eight wires to be connected or removed easily. These connectors can handle solid and stranded wires. This board can provide a much easier way of connecting your surrounding electronics to your development system. You just need a standard 2×5-pin header on your system to plug in this board. Development systems by mikroElektronika have compatible headers already installed, so you can plug this board into those systems without needing to solder or wire anything.
Use in your own design
While this board was created originally for mikroElektronika's development systems, it's certainly possible to use in your own project. To do so, you may want to pick up
IDC10 box headers
that you can solder onto your PCB, or an
EasyTEST
board and
jumper wires
to wire it up however you need to.
There are two versions of EasyConnect. This one has small-sized screw terminals for thinner-gauge wire. If you'll be using thicker wire, see the original
EasyConnect
which has standard-sized screw terminals.
Download EasyConnect2 Board Schematic