-40%
Set/4 1 3/8" diameter Piano Casters/Wheels for Vertical/Upright Piano w/hardware
$ 18.47
- Description
- Size Guide
Description
These casters generally will not fit large, antique upright pianos. Look at item #291752225041 and item #
291752221140 which are the correct metal wheel casters for large uprights.
These casters are the same dimensions, specs (and same manufacturer) as our item #
292018351082 caster set with the difference being these wheels are plain cast iron while the aforementioned set has plated wheels and looks better. This is a good set to consider if cosmetics are not a concern.
1 set of 4 piano casters/wheels with hardware. While these are typically found on US made spinets and consoles in the back corners I do see verticals with toe blocks (1930's-1940's era 45"-48" tall studios in particular, but some consoles and spinets) that use these front and back. Check what is on your piano if possible and if you have any questions please contact me. Brand new. Includes sockets, bushings, #10 x 1.5" screws & shims (may or may not be required - but tipped over in the living room with the old casters off isn't the time to find out you needed these components). 2 1/8" diameter mounting socket, mounts in approx 5/8" hole (probably what's there already). 1 3/8" diameter wheel, 1" wide.
I'm Howard Gustafson and I've been servicing pianos
full time
since I was 17 years old (I'm over 50 now) and during that time I have serviced/replaced casters on hundreds of pianos - antique uprights, spinets, consoles, studios, square grands, baby grands and grands. I have the
experience
and knowledge to answer questions about this product or work through a
difficult installation
before or after the sale (like when the piano is tipped over in the middle of the living room) - Your success at using and recommending my products and services is very important to me so my contact info is included in each shipment and you can also reach me through eBay.